Entries by Zifei Li

Going Wireless – Connecting HMI to PLC via ZigBee

In this guide, we will look at how to setup a wireless communication between an HMI and a PLC via ZigBee modules. What you need All of these: A Programmable Logic Controller (a Homer XL7 series is used) An HMI (a PanelMaster PT043 is used) Two ExpertDAQ Serial to ZigBee Converters (EX-9212-ZigBee-S) Cscape 9.6 installed […]

Getting Started – Horner All-in-One Controllers

Note: If this is your first time using Cscape, please download the Cscape starter guide and follow the steps. In this guide, we will look at how to setup a Horner All-in-One Controller with Cscape 9.6 software and download a project to it. What you need All of these: Horner All-in-One Controller (an XL7 series […]

Getting Started – PanelMaster HMI

This is a start-up guide to take you through the process of setting up you first HMI and download a project to it. What you need All of these: PanelMaster HMI (a PT104 with Ethernet is used in this demonstration) A PC installed with PM Designer (free download from our website) and one of these: […]