The Fluxicont FP is a robust and hygiene optimized calorimetric flow switch for liquids. Both the sensor and the housing of this device are made of stainless steel and it has no moving parts installed. With the closed, smooth enclosure the Fluxicont FP is insensitive to dirt and is therefore approved for use in hygienic applications. The influence on the medium to be measured can be kept low and also in the installation situation more flexibility is possible due to the design with only one sensor tip. Suitable for a flow range in liquids from 0.03 to 3 m / s, this sensor can be used for a variety of measurement tasks. The device is also equipped with either optional universal current adapter with relay output or optional DC version with PNP switching output.
The new sensor technology also enables faster response times. The stainless steel casing and the user interface with a bright 10-digit bar display can be rotated and thus ensure optimum operation in any mounting position.
[gdlr_toggle_box style=”style-1″ ]
[gdlr_tab title=”Technical Information”]
Supply Voltage: Type GA 16~45VDC Reverse Polarity Protected, Type WB 20..253VAC/DC 48~62Hz Reverse Polarity Protected
Supply Current: Type GA ≤ 1 W Switch output with no load, Type GW ≤ 1 VA / 1 W
Accuracy /Long term drift: ≤ ±0,5% FS / Year
Measuring Range: 3…300 cm/s, Greatest Sensivity 3…100 cm/s, Factory Setting 5…100 cm/s
Material Process Connection: Steel 1.4404/316L bzw. 1.4571/316Ti
Material Probe: Steel 1.4404/316L bzw. 1.4571/316Ti
Terminal enclosure: CrNi-steel
Gaskets: EPDM – Ethylene Propylene Diene Terpolymer
Environmental temperature: -40°C…+85°C
Process Temperature: Compensated Operating Range -20°C ~ +85°C, Process Temperature Limits -40°C ~ +140°C
[gdlr_tab title=”Document Downloads”]
[gdlr_tab title=”Product Cross Reference”]
Some minor variances may apply, contact us for more information.