Automation Technical Solutions throughout Australia
We are leading providers of automation technical solutions and support services for businesses in Australia. If you need support for an automation project or problem, then we have a highly skilled and experienced team on hand to advise you. Browse the resources below, including our collection of downloadable resources, and our FAQs. Get in touch with Autech Control Groups if you need to speak to an automation expert for personalised support.
FAQs
Horner’s Cscape control software integrates PLC logic and HMI graphics in the one package. It is free to download and use. To download the software, head to https://hornerautomation.com/cscape-software-free/cscape-software/ and register a free account. (Use the same account to log in when using the software to unlock full features.)
Please contact support at [email protected] for a download link and activation serial number. Please note that the software provided has OEM code 25 and only works with units sold in Australia.
The Rogowski Coils cables can be extended by the installer following below guidelines.
- The cable must be larger than 20AWG or 0.5mm²
- The cable should be twisted pair and shielded ideally
- The cable should be away from voltage conduit
The cables on the Rogowski Coils can be extended or ordered for up to 100m as tested. It should work beyond that length with good cable quality and minimum electrical interference. The cable length from the output of the integrator should be kept to a minimum. The output of the integrator has a VA burden rating. When running longer cables, the burden calculation should include the length, resistance of the cable and the burden on the input of the metering device.